Coupling Points
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
51
Coupling point for
side rail
Accessories can be fastened to the side rails with clamps.
At the ends of the side rails, there is a locking mechanism that
prevents accessories from sliding off the side rail.
[A]
movable locking mechanism (lever)
[B]
fixed locking mechanism (not on all side rails)
Accessory parts with a rigid clamp (without a movable claw) can
be slid onto the side rail only on the side with a movable locking
mechanism [A]. The clamp will then push back the lever [A]. Slide
the accessory part on the side rail until the clamp is fully seated on
the side rail, and the side rail lever is vertical again.
Before removing the accessory part, manually swivel the lever [A]
into the side rail so that the clamp can be slid over it.
Additional coupling
points
Insertion opening for the extension adapter