Travel Behavior
88
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
5. Fold up or remove accessories from the operating table.
21.2
Unlocking the operating table (releasing the brake)
Once the Unlock function has been selected, the floor locks [36]
are retracted from all four wheels of the operating table. The
operating table is movable.
1. Prepare the operating table according to the conditions on
page 87.
2. Press key [i52] or [i54] until an audible signal sounds.
The signal will sound intermittently until the operating table
jacks are fully retracted and the additional wheel [17]
1)
in the
middle under the running gear is extended. The indicator
illuminates on the column keypad according to the function
selected. The appropriate status pictograms are visible in the
remote control display. On the remote control, the available
buttons for Running gear functions are backlit.
3. Set the travel behavior and slide the operating table manually.
NOTICE
Risk of material damage. Risk of shearing off the
connecting cables!
Disconnect the power and equipotential bonding
cables before transporting the operating table.
When transporting the operating table, do not roll over
or crush the connection or equipotential bounding
cable.
CAUTION!
Risk of personal injury. Hazard to the patient!
Unlocking the operating table on an inclined plane could result in
unexpected operating table movement. Hold the operating table
securely before releasing the brake.
1)
not for free movement function selection