Using the Operating Table as an Extension Table
54
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
13
Using the Operating Table as an Extension Table
The operating table can be adapted with the help of the extension
unit for the extension table. The extension adapter is hooked into the
insertion apertures [10]/supports [11] (at the foot end beneath the
seat section) and firmly clamped to the operating table top. When
using the extension unit, the user manual of the extensions adapter
must be followed.
Restrictions
regarding the
extension table
The extensions adapter is automatically recognized by the
operating table and for security reasons, the following restrictions
apply:
1. The function for longitudinal travel and the functions of the leg
sections are locked. The buttons for the functions are no longer
active on the remote control.
2. The inclination of the operating table top is limited to 20°
about the transverse axis and to 10° about the longitudinal
axis.
3. In the level position function, the functions for the leg sections
and longitudinal travel are excluded.