Attaching the Section Segment to the Operating Table Top
56
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
Removing the section
segment
Lift the section segment [A] obliquely upwards and push it towards
the operating table top until it can be lifted out of the fixing points on
the operating table top.
14.2
Section segment with release button
A typical section segment with release button is the single-joint head
section (closed section segment).
Attaching the section
segment
1. For a closed section segment, bring the joints on the operating
table top to the same angular position.
2. Insert the section segment with the hooks [A] obliquely from
above, from the front or obliquely from below into the fixing
points of the operating table top.
3. Pull the section segment [A] away from the operating table top
until the locking bolts engage securely on the hooks. The hooks
must be guided precisely into the recesses of the fixtures.