Safety
Instruction manual Operating table TruSystem 7000 – 1 730 263 – 11/2016
17
CAUTION!
Risk of personal injury and material damage. Risk of
collision when adjusting the operating table!
Perform all patient repositioning in a controlled and
responsible manner! Pay close attention to all
electrically supported operating table functions and
movements, up to the final position, to rule out any
hazard to the patient and material damage to the
operating table, equipment or furnishings. Care must be
taken to avoid collisions. The operator must take care
to interrupt any function that poses this risk.
Pay close attention that no surgical draping, tubing or
other objects can be touched and pinched by movable
parts.
Pay particular attention to the operating table when
lowering, since the table top may collide with objects
lying below it, or it may even make contact the floor if it
is set in an extreme position. Users should be aware of
the fact that there exists a risk of crushing injuries to both
the patient and the staff. Extreme care should be taken
to avoid these risks.
CAUTION!
Risk of personal injury and material damage. Hazard to the
patient!
• Continually monitor the patient's position.
When moving to level position on the operating table, larger
patient incline positions can occur compared to the initial
position.
Select the Level position function only if there is no possibility of
collisions! Monitor the movement to level position up to the final
position.
• Risk of physical injury due to the operating table tipping over!
Moving the operating table with a patient positioned on it is
only permitted if specific conditions are met (see page 87).
•
Danger of collision!
Be especially careful when transporting
the operating table! Be careful to avoid collisions with nearby
persons or furniture to prevent damage to the table!