Default Setting (System Menu)
9-81
9
Panel Reset Timer
If you select [On] for
Auto Panel Reset
, set the amount of time to wait before
Auto Panel Reset
. Options are
between 5 and 495 seconds (every five seconds).
NOTE:
If you select [Off] for
Auto Panel Reset
, the time display does not appear.
Use the procedure below to set the reset time.
1
Press the
System Menu
key.
2
Press [
], [Date/Timer] and then [Change] of
Panel Reset Timer
.
3
Press [+] or [–] to enter the time until
Auto Panel Reset
is turned on.
You cannot use the numeric keys to enter this value.
4
Press [OK].
Low Power Timer
You can specify the amount of time to wait before Auto Low Power Mode.
Specify a value from 1 - 240 minutes (1 minute increments).
For more information on Low Power Mode, refer to the
Low Power Mode and Auto Low Power Mode on page 2-
11
.
Use the procedure below to set the Low Power Mode.
1
Press the
System Menu
key.
2
Press [
], [Date/Timer] and then [Low Power Timer].
3
Press [+],[–] or the numeric keys to enter the time until Low Power Mode is turned on.
4
Press [OK].
Auto Sleep
If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to
Sleep and Auto Sleep on
page 2-12
for Sleep.
Auto Sleep
Select whether to use Auto Sleep or not.
NOTE:
Time remaining before Auto Sleep can be modified as necessary.
Use the procedure below to specify the auto sleep setting.
1
Press the
System Menu
key.
2
Press [
], [Date/Timer] and then [Change] of
Auto Sleep
.
3
Press [Off] or [On].
4
Press [OK].
Summary of Contents for DCC 2965
