Default Setting (System Menu)
9-46
Auto % Priority
When a paper source of different size from the original is selected, select whether automatic zoom (reduce/
zoom) is performed. The table below shows the available settings.
IMPORTANT:
If you want to enable the changed defaults immediately, move to the function screen and press
the
Reset
key.
Use the procedure below to specify the automatic zoom priority.
1
Press the
System Menu
key.
2
Press [Copy] and [Change] of
Auto % Priority
.
3
Select the default for [Off] or [On].
4
Press [OK].
Reserve Next Priority
Select the operation of the reserve copy and interrupt copy functions and for canceling jobs.
Use the procedure below to select the default
Reserve Next Priority
setting.
1
Press the
System Menu
key.
2
Press [Copy] and [Change] of
Reserve Next Priority
.
3
Select the default for [Off] or [On].
4
Press [OK].
Paper Size for Small Original
Specify the paper size to be used for a case where the original is too small to be detected in the Auto Paper
Selection mode.
The procedure is as follows.
1
Press the
System Menu
key.
2
Press [Copy] and [Change] of
Paper Size for Small Original
.
3
Select the paper size.
The following paper sizes can be selected:
Default Paper Source, A4, A4-R, A5-R, A6-R, B5, B5-R, B6-R, Letter, Letter-R, Statement-R
4
Press [OK].
5
Move to the copy screen and press the
Reset
key.
Item
Description
Off
No zoom performed (copied in original size).
On
Automatic zoom performed as appropriate.
Summary of Contents for DCC 2965
