Default Setting (System Menu)
9-109
9
LAN Interface
Specify the settings for the LAN interface to be used. The default setting is
Auto
.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to
Restart Network on page 9-109
.
Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
, [
] and then [Change] of
LAN Interface
.
3
Select [Auto], [10BASE-T Half], [10BASE-T Full], [100BASE-TX Half], [100BASE-TX Full] or [1000BASE-
T] as the LAN interface.
4
Press [OK].
Restart Network
To restart the network card of the device, follow the steps below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
, [
] and then [Start] of
Restart Network
.
Summary of Contents for DCC 2965
