Preparation before Use
2-10
Power Off
Before turning off the main power switch, press the
Power
key on the operation panel to off. Make sure that the
Power
key, the processing indicator and the memory indicator are off before turning off the main power switch.
If you will not switch of the main power switch, refer to
Low Power Mode and Auto Low Power Mode on page 2-
11
,
and
Sleep and Auto Sleep on page 2-12
.
CAUTION:
The hard disk may be operating when the
Power
key, the Processing indicator or Memory indicator
is lit or blinking. Turning off the main power switch while the hard disk is operating may cause damage.
In case of not using the machine for an extended period of time
CAUTION:
If this machine will be left unused for an extended period (e.g. overnight), turn it off at the
main power switch. If the machine will not be used for an even longer period of time (e.g. vacation),
remove the power plug from the outlet as a safety precaution. If the optional Fax kit is installed, note that
turning the machine off at the main power switch disables fax transmission and reception.
CAUTION:
Remove paper from the cassettes and seal it in the paper storage bag to protect it from humidity.
Make sure that lamps
other than this lamp
are off.
Summary of Contents for DCC 2965
