Copying Functions
4-13
4
Paper Output
You can use the procedure below to select an output destination such as the optional document finisher for your
copies.
NOTE:
Optional output destinations include the job separator, 1,000 sheet document finisher, 4,000 sheet
document finisher, and mailbox.
The table below shows the available output destinations.
NOTE:
To change the default destination for copies, refer to
Paper Output on page 9-15
for details.
When [Heavy 3] (164 g/m
2
- ) or higher is set in Paper Weight and Mailbox (Option) is set for the output
destination, the output destination is automatically changed to a tray that can be used.
Use the procedure below to select the output destination.
1
Press the
Copy
key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Paper
Output].
4
Select the output destination for finished copies.
5
Press [OK].
6
Press the
Start
key to start copying.
Destination
Description
Lower Left Tray*
Upper Left Tray*
*
This cannot be selected when the optional document finisher is installed.
Left side tray of the machine
Tray A, Tray B, Tray C
Trays A to C in the optional document finisher
Right Tray
Right side tray of the machine
Tray 1 to 7
Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)
Paper Output
Face Up
Status
Copies
Cancel
OK
Add Shortcut
Tray A
Right Tray
Tray C
Tray B
Tray 1
Tray 3
Tray 2
Tray 5
Tray 4
Tray 6
10/10/2010 10:10
Tray 7
100%
A4
A4
Preview
Original
Zoom
Paper
:
:
:
Summary of Contents for DCC 2965
