Default Setting (System Menu)
9-9
9
For Custom 1-8, settings for duplex printing and media type name can be changed.
Use the procedure below to set the paper weight.
1
Press the
System Menu
key.
2
Press [Common Settings], [Next] of
Original / Paper Settings
and then [Next] of
Media Type Setting
.
3
Press [Next] for the media type whose weight you want to change.
4
Press [Change] of
Paper Weight
.
5
Select the weight and press [OK].
The previous screen reappears.
6
Press [Close].
7
To change the duplex printing settings for Custom 1 (-8), press [Next] of
Custom 1(-8)
and then [Change]
of
Duplex
. Select [Prohibit] or [Permit] and press [OK].
The previous screen reappears.
8
Press [Close].
9
To change the name for Custom 1(-8), press [Next] of
Custom 1(-8)
and then [Change] of
Name
. Enter the
name and press [OK].
NOTE:
Refer to the
Character Entry Method on page Appendix-8
for details on entering characters.
Default Paper Source
Select the default paper source from Cassette 1-7 and Multi Purpose Tray.
NOTE:
[Cassette 5] to [Cassette 7] are displayed when the following options are installed.
[Cassette 5]: When a side feeder (3,000-sheet), side feeder (500-sheet x 3), or large capacity side feeder (500,
1,500-sheet x 2) is installed
[Cassette 6]: When a side feeder (500-sheet x 3) or large capacity side feeder (500, 1,500-sheet x 2) is
installed
[Cassette 7]: When a side feeder (500-sheet x 3) or large capacity side feeder (500, 1,500-sheet x 2) is installed
Item Description
Duplex Prohibit
Duplex
printing not allowed.
Permit
Duplex printing allowed.
Name
Change names for Custom 1-8. Names should be not more
than 15 characters. Selecting media type at multi purpose
tray, the name after change will be displayed.
Summary of Contents for DCC 2965
