Default Setting (System Menu)
9-105
9
IPP Security
Select the IPP security level. This setup is available when
SSL
is
On
. The default setting is
IPP or IPP over SSL
.
NOTE:
IPP must be set to [On] in
Protocol Detail on page 9-101
.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to
Restart Network on page 9-109
.
Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
, [
], [Next] of
Secure Protocol
, and then [Change] of
IPP Security
.
3
Press [IPP over SSL Only] or [IPP or IPP over SSL].
4
Press [OK].
HTTP Security
Select the HTTP security level. This setup is available when
SSL
is
On
. The default setting is
HTTP or HTTPS
.
NOTE:
HTTP or HTTPS must be set to [On] in
Protocol Detail on page 9-101
.
IMPORTANT:
After changing the setting, restart the network from the system menu, or turn the machine OFF
and then ON. For detailed information on restarting the network, refer to
Restart Network on page 9-109
.
Use the procedure below.
1
Press the
System Menu
key.
2
Press [System], [Next] of
Network
, [
], [Next] of
Secure Protocol
, and then [Change] of
HTTP Security
.
3
Press [HTTP or HTTPS] or [HTTPS Only].
4
Press [OK].
Summary of Contents for DCC 2965
