Default Setting (System Menu)
9-56
File Separation
Set whether transmission copies are divided into multiple files before being forwarded.
Use the procedure below to set the default for File Separation.
1
Press the
System Menu
key.
2
Press [Send] > [Next] of
Send and Forward
> [Change] of
File Separation
.
3
Press [Off] or [Each Page] to set File Separation.
4
Press [OK].
NOTE:
A three-digit serial number such as abc_001.pdf, abc_002.pdf... is attached to the end of the file
name.
E-mail Subject
Set the subject of forwarded e-mails.
Use the procedure below to set the default E-mail Subject.
1
Press the
System Menu
key.
2
Press [Send] > [Next] of
Send and Forward
> [Change] of
E-mail Subject
.
3
Enter a maximum of 60 characters for the e-mail subject and press [OK].
NOTE:
Refer to the
Character Entry Method on page Appendix-8
for details on entering characters.
FTP Encrypted TX
Set whether transmission copies are encrypted before being forwarded.
Use the procedure below to set the default FTP Encrypted TX
1
Press the
System Menu
key.
2
Press [Send] > [Next] of
Send and Forward
> [Change] of
FTP Encrypted TX
.
3
Select [Off] or [On].
4
Press [OK].
NOTE:
When the SSL setting is not enabled, FTP encryption transmission cannot be enabled.
Summary of Contents for DCC 2965
