CDI-E062
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
CDI-E062-010
© 2002 CANON INC.
Step 1
Preparing the Camera
A.
Charge the battery pack. (Battery charger types vary by
region.)
Place the battery pack in the battery charger and plug the charger into
an electrical outlet. The charging indicator shines red while charging
and changes to green when the battery pack is charged.
Charging the battery pack takes approximately 130 minutes.
B.
Install the battery pack.
C.
Install the CF card.
Slide the battery cover open. Press the battery lock while inserting the
battery pack all the way in, aligning the arrows on the camera and
battery pack. Slide the battery cover closed.
CF card eject button
Slide the lock and open the CF card slot cover. Insert the CF card with
its label facing upward until the slot’s eject button fully extends. Close
the CF card slot cover.
Step 2
Shooting
A.
Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
) to
.
PowerShot S330 DIGITAL
ELPH/DIGITAL IXUS 330
B.
Turn on the power.
Press the ON/OFF button until the green power lamp lights.
C.
Set the date and time. (first time the camera is powered on)
PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v
2
D.
Focus.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
Point the camera in the direction of the subject you wish to shoot and press the
shutter button halfway. The camera beeps twice when the subject is in focus.
E.
Shoot.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
Press the shutter button fully. This activates the shutter and causes the
shutter sound or the beep to sound once. The recorded image is displayed
on the LCD monitor for approximately 2 seconds.
Turn off the power.
Press the ON/OFF button to turn the power off. Even if the ON/OFF button is
not pressed, the power will automatically shut down 3 minutes after the last
control is accessed.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
Step 3
Reviewing an Image
A.
Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
) to
.
B.
Turn on the power.
Press the ON/OFF button until the green power lamp lights.
The last recorded image appears in the LCD monitor.
C.
View the images.
Use the buttons to display the image you wish to see.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
Erasing Images
Display the unwanted image with the buttons and press the button.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
When the confirmation screen appears, check that [Erase] is selected and press
the
SET
button.
PowerShot S330 DIGITAL ELPH/DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v
2
Printing Images without Using a Computer
This camera is compatible with the direct print function. By connecting it with a
single cable to a direct print function compatible printer (optional) or a direct
print function compatible Bubble Jet printer, you can easily print your images
with simple operations.
Card Photo Printer CP-10
Direct Print Function Compatible Bubble Jet Printer**
Interface cable
* The interface cable is included with the direct print function compatible printer.
** To find out if your Bubble Jet printer is compatible with the directprint function
and for detailed information regarding the Bubble Jet printer, please refer to
the documentation that came with your printer.
c.
When [Select Components] appears, select your camera
model name and click [Next].
d.
Follow the onscreen instructions.
The software required for the camera will be installed.
e.
When the Installer Panel displays again, after the
installation is complete, click [Exit].
For the USB driver to install correctly
the Canon Digital Camera
Solution Disk must be removed from the computer
.
B.
Connect the camera to the computer.
• When installing the driver, turn the camera’s power off
before connecting the cable to the computer.
a.
Connect the USB cable to the computer.
If the computer has two USB ports, you can use either one of them.
USB Port
USB Cable
b.
Connect the USB cable to the camera.
Open the terminal cover and connect the cable.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
Continued on the reverse page.
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
PowerShot S330 DIGITAL ELPH/DIGITAL IXUS 330
The Set Date/Time menu will appear on the LCD monitor when the camera
is first turned on.
Use the buttons to select the items you wish to set, and the
buttons to change the value.
To put the settings into effect, press the
SET
button.
Interface cable*
Card Photo Printer CP-100
Interface cable*
Step 4
Installing the Software on the
Windows Platform
Macintosh users, please refer to the reverse page.
A.
Install the software.
• Do not connect the camera to the computer before the
software is installed.
• The USB driver will start its installation procedures after the
camera has been connected to the computer.
• For more information about the system requirements, please
refer to the
Software Starter Guide.
• Users of Windows 2000 and Windows XP Professional must
first log in as an Administrator (computer system
administrator) to install programs.
• Close any programs that are running.
a.
Set the Canon Digital Camera Solution Disk in the
computer’s CD-ROM drive.
The installer panel will display automatically.
If the installer panel does not appear automatically, double-click the
CD-ROM icon from [My Computer] and double-click the [Setup] icon.
b.
Click [Software Installation] and follow the onscreen
instructions that appear.
ENGLISH
This guide explains the required operations the first time
the camera is used, as well as how to install the software
and download images to a computer.
For more information about usage precautions and detailed
instructions, please refer to the manuals listed below.
Usage precautions ..............................
Camera User Guide
Camera’s detailed operations ............
Camera User Guide
Simple software operations ...............
Software Starter Guide
Detailed software operations (Windows
®
)
ZoomBrowser EX Software User Guide
(A PDF file on the supplied CD-ROM)
Detailed software operations (Macintosh)
ImageBrowser Software User Guide
(A PDF file on the supplied CD-ROM)
Please refer to the
Troubleshooting
section of the
Software Starter Guide
if
you have trouble installing the software or downloading images.
Do not connect the camera to the computer before the software is
installed.
*EC118116hkQSGE,vGM
3/29/02, 2:16 PM
1
