TX6000 Series Operation Manual Ver1.4
77
7.1.6
Output RESister subsystem commands
The Output RESister subsystem commands are mainly used to set the output
internal resistor mode. The Output RESister? query returns the current output
internal resistance status.
Command syntax:
30
ORESister
100
For example: WrtCmd (“ORES 30”); Set the output internal resistance is 30 OHM.
Query syntax: ORESister?
Return format: <NR1><NL^END>
7.1.7
BIAS subsystem commands
The :BIAS subsystem commands are mainly used to set the internal bias voltage
and the bias status (only work in TH2832).
Command tree:
BIAS
:STATe ON (1)
OFF (0)
:VOLTage
<value>
MIN
MAX
:CURRent
<value>
MIN
MAX
The BIAS:STATe command is used to set the bias status. The :STATe? query
returns the current bias status.
Command syntax:
ON
BIAS:STATe OFF
1
0
