TX6000 Series Operation Manual Ver1.4
20
3.3.2
NOM.
Nominal parameter is the nominal value used to make bin compare.
3.3.3
BIN
This zone shows the bin number of the limit list. “2nd” means the secondary
parameter limit.
3.3.4
HIGH/LOW
This zone shows the high and the low limits of the limit list.
3.3.5
COUNT
This zone shows the count value of the current bin.
3.3.6
AUX
This zone shows the count value of the auxiliary bin.
3.3.7
OUT
This zone shows the count value of the out bin.
Operation steps for bin count function
Execute the following operations to set the bin count function ON/OFF on <BIN
COUNT DISP> page.
1)
On < BIN COUNT DISP> page, move the cursor to COUNT zone, the
following soft keys will be displayed.
ON
OFF
RESET COUNT
2)
Press the soft key ON to turn on the count function.
3)
Press the soft key OFF to turn off the count function.
4)
Press the soft key RESET COUNT, “
☺
: Reset count, Sure?” will be displayed
in the help zone. Then the following soft keys will be displayed.
YES
NO
5)
Press the soft key YES to reset all bin counts to 0.
6)
Press the soft key NO to cancel the reset operation.
