TX6000 Series Operation Manual Ver1.4
9
<FILE MANAGE>
<SYSTEM SETUP>
MORE
2/2
2.4.3
[SYSTEM SETUP]
This key-[SYSTEM SETUP] is used to enter into the system setup page. The
following soft keys will be available:
<SYSTEM SETUP>
<MEAS SETUP>
<DEFAULT SETTING>
<SYSTEM RESET>
2.5
Basic Operation
Basic operation of TX6000 series is as follows:
Use menu keys ([DISP], [SETUP]) and soft keys to select the desired page.
Use cursor keys ([
←
][
→
] [
↑
] [
↓
]) to move the cursor to the desired zone.
When the cursor moves to a specified zone, the zone will become reverse
expression.
The soft key functions corresponding to the current zone of the cursor will be
displayed in the soft key zone. Users can select and use the desired key.
Numeric keys, [
←
] and [ENTER] are used to input data.
When a numeric key is pressed down, the usable unit soft key will be
displayed in the soft key zone. You can choose a unit soft key or press [ENTER]
to end data inputting.
2.6
Start the instrument
Plug in 3-line power plug.
Caution: Keep the power-supply voltage and frequency conform to above
specifications. Power input phase line L, zero line N, ground line E should be the
same as that of the instrument.
Press the power switch at the left corner on the front panel and then a boot screen
will appear which displays our company logo, instrument model, and the version
number of the software.
