Pag. 43
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
On the Display appears:
Through the loud speaker plugged into the mother board (see page 4), you will hear the recording
playback.
12 Additional settings
In this section you will see how to set other important parameters for the Dualcom-8 control panel.
While in the programming menu press the digits:
On the Display appears:
In this mode you may set the following:
1. Set the number of rings for the remote interrogation.
2. Priority between the PSTN or GSM network.
3. Set the format for the GSM alarm trigger transmission.
4. Set the number of transmission attempts that must take place in case of tel. line fault.
5. Able or Disable the keypad or PC. connection to program the Dualcom-8.
6. Able or Disable the keypad tone that indicates PSTN and GSM line failure.
7. Set the Dualcom-8 to Arm even if there are Zones not in function.
8. Set the Entrance and Exit delay times.
9. Set the siren and keypad alarm trigger time.
10. Set the date and the hour.
11. Set the synchronism of the events.
Voice
<02>01
01 to 08
:
Message recording number
【
】+【
12
】+【#】
Other setting
F
