Pag. 27
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
06.01 Management of the wireless zones for tel. Alarm transmission
NOTE: The wireless zone tel. Transmission is form zone 25 to 72.
When in the tel. Alarm transmission menu
,
press the digits
【
25
】
+
【
#
】
or flow up and down in the
menu with the keys:
【
】
or
【
】
On the display will appear:
Set the parameters for the telephone alarm transmissions and at the end confirm with the
【
#
】
.
Example of a typical setting:
Setting of zone 25 :
1. Transmission of the alarm to the 1st. tel. Number memorized for this zone.
2. NO transmission of the alarm to the 2nd. Number memorized.
3. NO transmission of the alarm to the 3rd. Number memorized.
4. NO transmission of the alarm to the 4th number memorized.
5. Transmission of the alarm to the 5th number memorized.
Press the following keys:
At the end, confirm with the
【
#
】
.
06.02-24 Management of the zones 26 to 72 for the wireless tel. Alarm transmission.
Proceed as described in section 06.01. You must, however, enter into the programming mode by:
Pressing the digits
【
(26-72)
】
+
【
#
】
or flow up and down in the menu with the keys:
【
】
or
【
】
Wireless report
<25>10001
TRANSMISSION OF THE ALARM TO:
(1)
First number
0=no transmission
[1]
= transmission
(2)
Second number
[0]
= no transmission
1 = transmission
(3)
Third number
[0]
= no transmission
1 = transmission
(4)
Forth number
[0]
= no transmission
1=transmission
(5)
Fifth number
0=no transmission
[1]
= transmission
ZONE no.
Wireless report
<25>10001
