Pag. 21
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
04. Management of the wireless zones
In this section it is possible to manage and set 48 wireless zones.
To memorize and set, on the keypad, press the keys seen below:
On the display will appear :
In this mode you may program all wireless zone to function as shown below:
1. Select alarm type (Burglary - Fire - Hold-up)
2. Zone must function 24 hours or only when panel is Armed
3. Zone must be immediate or delayed
4. Type of siren it must trigger (Hardwire or Wireless)
5. Type of sound the siren must emit
6. Setting of keypad buzzer
7. Arming in mode DAY or NIGHT
8. Sensor battery control function
9. Wireless sensor to be set for protection of Area 1 or Area 2
You may go up and down in the menu by pressing:
To go to the next page.
To go to the previous page.
IMPORTANT NOTICE:
This section indicates only how the wireless zones must function. All sensors are manufactured with
the “PEGASO” wireless transmission protocol and must be self learned by the control panel. See
section 10.02 to understand how this must be done.
The management of all wireless sensor begin with zone 25 up to zone 72.
【
】+【
04
】+【#】
Wireless zones
F
