Pag. 47
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
12.07 Setting the Dualcom-8 procedure in case of Faulty or Inactive Zone
In the menu “other setting” press the digits
【
07
】
+
【
#
】
or flow up and down in the menu with the
keys:
【
】
or
【
】
On the display will appear:
To change these parameters
press the digits:
【
(07 )
】
+
【
#
】
On the Display appears:
On the keypad, digit the desired parameters and confirm with the key
【
#
】
The Keypad will confirm with 2 beep.
12.08 To set the control panel’s entrance and exit time
In the menu “other setting” press the digits
【
08
】
+
【
#
】
or flow up and down in the menu with the
keys:
【
】
or
【
】
On the Display appears:
To change these parameters
press the digits :
【
(08 )
】
+
【
#
】
On the Display appears:
On the keypad digit the desired parameters and confirm with the key
【
#
】
The Keypad will confirm with 2 beeps.
Other setting
<07>11
Other setting
<07>11
Procedure
[0] Normal Arming:
Panel will not Arm
[1]
Forced Arming :
The panel will disable the zone and
then Arm
Memory of events
[0] Not in function. No events are memorized
[1]
Enabled. All events are memorized in the event log
Other setting
<08>3030
Other setting
<08>3030
Exit Time
[00-99] From zero to 99 seconds
In this case you see it set for 30 seconds.
Entrance Time
[00-99] From zero to 99 seconds
In this case you see it set for 30 seconds.
