Pag. 39
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
10.04 How to cancel the wireless sensor from the Dualcom-8 memory
In the menu to self learn the Sensor, Keychain Tx. and Electronic Keys,
press the digits
【
04
】
+
【
#
】
or flow up and down in the menu with the keys:
【
】
or
【
】
The Display will show:
To cancel the sensor that has been self learned on Zone 25
, Press the digits:
【
25
】
+
【
#
】
On the Display you will see:
The keypad will emit 2 beeps to confirm that the zone 25 sensor has been deleted for the memory.
To cancel any other wireless sensor memorize in any of the zones,
press digits :
【
(26-72)
】
+
【
#
】
On the Display you will see:
The Keypad will emit 2 beeps to confirm that the sensor previously learned
had been deleted form the memory.
10.05 Self learn of “Pegaso” wireless outdoor siren
To memorize a siren with the Dualcom-8,
it is necessary that the siren be set to receive a
“Pegaso” code transmission form the control panel. To set the siren dip switch, read the siren
installation instructions.
In the menu for the self learning of the Sensor, Keychain Tx. and Electronic Keys, press the digits:
【
05
】
+
【
#
】
or flow up and down in the menu with the keys:
【
】
or
【
】
On the Display you will see:
When the Dualcom-8 is in this mode, it will automatically transmit to the siren it’s code and the siren
will self learn this code. To repeat this function you must press the digits
【
05
】
+
【
#
】
or flow up and
down in the menu with the keys:
【
】
or
【
】
Code learning
<04>25
Code learning
<04>25
Code learning
<04>26
26-72
:
Position or Zone No.
Code learning
<05>12345678
12345678
: Pegaso
Transmission code
sent to siren
