Pag. 42
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
TO START:
The microphone for message recording is found on position 49 of the mother board (see page 4).
Before recording be sure that there is no back ground noise and that you speak clearly, slowly and
as close as possible to the microphone. The playback speaker is supplied separately with the control
panel and is inserted in the position 50 (see page 4)
RECORDING TIME IS 8 SECONDS.
To record the first message press the digits:
【
(01 )
】
+
【
#
】
On the Display will appear:
Proceed immediately to record the 1st. voice message and at the end, on the Display will appear:
This indicates that the 1st. Message has been recorded and that the Dualcom-8 is ready for the 2nd
voce message.
To record the 2nd to 8th message
, press the digits:
【
(02-08 )
】
+
【
#
】
On the Display appears:
Proceed immediately to record the 2nd. voice message and at the end, on the Display will appear:
This indicates that the 2nd. message has been successfully recorded and that the Dualcom-8 is
ready for the 3rd message.
To hear the playback of the 1st recorded message you must plug-in the loud speaker into
position 50 on page 4.
Press the digits:
【
(02 )
】
+
【
#
】
On the Display appears:
You may listen to all 8 messages recorded by pressing the keys
【
(02-08 )
】
+
【
#
】
or flow up and
down in the menu with the keys:
【
】
or
【
】
Voice
<01>01
Voice
<01>02
Voice
<01>02
01 to 08
: Number of the
message recorded
Voice
<01>03
01 to 08
:
Number of the
message recorded
Voice
<02>01
