Pag. 34
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
NOTE: The below messages are factory installed but can be cancelled and new messages
can be installed. In this operation indicate first the message position followed by the new
SMS.
09.02 SMS message management: To cancel a message
Whole in the SMS transmission menu
,
press the digits
【
02
】
+
【
#
】
or flow up and down in the menu
with the keys:
【
】
or
【
】
On the Display will appear:
NOTE: THE MESSAGES SHOWN IN THE ABOVE TABLE 01 TO 08 ARE FTY. INSTALLED
When you install a new SMS message the fty. installed message, will automatically over ride the
factory installed message. If you then cancel the newly installed message, the factory installed mes-
sage will be again installed. To cancel a newly installed message, you must press the digits for
【
(02
to 08)
】
+
【
#
】
and follow the indications in the above table.
Position Factory Installed Message
01
SMS Text message : max. 120 characters
Relay 1 “ON”
02
SMS Text message : max. 120 characters
Relay 2 “ON”
03
SMS Text message : max. 120 characters
Relay 3 “ON”
04
SMS Text message : max. 120 characters
Relay 1 “OFF”
05
SMS Text message : max. 120 characters
Relay 2 “OFF”
06
SMS Text message : max. 120 characters
Relay 3 “OFF”
07
SMS Text message : max. 120 characters
HELP CALL
08
SMS Text message : max. 120 characters
OTHER EVENT
Sms
<02>01
Sms
<01>01
Position
