Pag. 52
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
13 Weekly management of the installation
In this section you may understand how to install and manage the Dualcom-8 on a weekly bases for
each AREA in both DAY and NIGHT MODES, featuring automatic ARM/DISARM.
In the programming menu press the digits:
On the Display appears:
When in this programming mode you may:
1. Select the day to Arm and Disarm the AREA1 of the panel when it is in DAY mode.
2. Select the day to Arm and Disarm the AREA1 of the panel when it is in NIGHT mode.
3. Select the day to Arm and Disarm the AREA2 of the panel when it is in DAY mode.
4. Select the day to Arm and Disarm the AREA2 of the panel when it is in NIGHT mode.
13.01 To program the Dualcom-8 to Arm or Disarm the AREA 1 when it is in DAY
When in the menu “Weekly management ” press the digits
【
01
】
+
【
#
】
or flow up and down in the
menu with the keys:
【
】
or
【
】
On the Display appears:
To change these perameters press the
digits:
After programming confirm with the digit
【
#
】
.
The keypad will confirm with 2 beeps.
Note: If the time used is 25:00, this function will be automatically disabled.
【
】+【
13
】+【#】
Panel auto
Panel auto
<01>25002500
Panel auto
<01>14301645
MODE
hh : mm
(Hour: minutes)
Arming Time
Example time:
14:30
Disarm Time
Example time:
16:45
01= Monday , DAY
(See table on Page 54)
F
