Pag. 28
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
07 Management of event report transmissions to memorized tel. numbers
In this section you will find the management of the control panel events (Faults, Relay Status, Access
etc. …) and how they may be transmitted to the memorized dialler telephone numbers.
To memorize a new number press the keys:
On the display appear:
In this section, each zone may be programmed to transmit the event reports
1. To the first telephone number
2. To the second telephone number
3. To the third telephone number
4. To the fourth telephone number
5. To the fifth telephone number
You may select the correct menu by pressing the UP and DOWN keys seen below:
To go back to the next page.
To go to the previous page.
REPORT SCHEDULE
【
】+【
07
】+【#】
Other report
* REPORT NUMBER INFORMATION REPORTED
01
GSM NESTWORK FAULT
02
PSTN NETWORK FAULT
03
CONTROL PANEL BATTERY LOW
04
MAINS FALURE 230 Vac
05
PANEL ARM / DISARM
06
RELAY
1
STATUS
07
RELAY
2
STATUS
08
RELAY
3
STATUS
09
EMERGENCY OR MEDICAL DISTRESS
10
FIRE ALARM TRIGGER
11
HOLD-UP ALARM TRIGGERED
12
EXIT OF PROGRAMMING MODE
13
TEST OF REPORTS
14
WIRELESS SENSOR LOW BATTERY REPORT
15
ZONE BY-PASSED REPORT
F
