Pag. 44
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
12.01 How to set the number of rings for the remote interrogation.
In the menu “other setting” press the digits
【
01
】
+
【
#
】
or flow up and down in the menu with the
keys:
【
】
or
【
】
On the Display appears:
To change these parmeters,
press the digits:
【
(01 )
】
+
【
#
】
On the Display appears:
Press, on the keypad, the desired parameters to be
set and at the end confirm with
【
#
】
.
The keypad will emit 2 beeps as confirmation of setting.
12.02 Priority of selection between the PSTN and GSM network
In the menu “other setting” press the digits
【
02
】
+
【
#
】
or flow up and down in the menu with the
keys:
【
】
or
【
】
On the Display appears:
To change these parameters
press the
digit:
【
(02 )
】
+
【
#
】
On the
Display appears:
Other setting
<01>42
GSM telephone dialler settings
[1-9] Number of rings for alarm trigger (in this case 2)
[0] GSM remote management is not active.
Other setting
<01>42
PSTN telephone dialler settings
[1-9] number of rings for alarm to trigger (In this case 4)
[0] PSTN remote management is not active.
Other setting
<02>201
Number of telephone line attempts before
network change
[1-9] Number of attempts (in this case
[1]
)
Other setting
<02>201
Change method between networks
[0]
Automatic change in case of network failure.
[1] Normal change, in case of network failure, automatic
change after a defined number of transmission attempts.
Mode
[0] PSTN and GSM networks working together: In case
one fails the other network will pick up the transmission.
[1] PSTN network priority: If this network is not working
the transmission will automatically be sent by GSM.
[2]
GSM network priority: If this network is not working the
transmission will be automatic sent by PSTN.
