Pag. 55
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
14 Weekly management of the Dualcom-8 Home Automation system
In this section is described how to set the weekly management of the HOME AUTOMATION function
The home automation function may be integrated with the Dualcom-8 control panel with a 3 wire
connection to the optional HA-3 module. (See appendix B on page 63).
In the programming menu press the digits:
On the Display appears:
When in the “Home auto” program position, you may:
Change from N.O. to N.C. the position of each
Relays (1, 2 and 3)
three times daily on a
weekly basis.
14.01 Weekly home automation management starting with Monday. To have the number 1
relay change state you must:
In the menu “Home auto” press the digits
【
01
】
+
【
#
】
or flow up and down in the menu with the
keys:
【
】
or
【
】
On the Display appears:
To change these parameters
digit:
After programming with the Keypad press the key
【
#
】
to confirm
The Keypad will confirm with emit 2 beeps.
【
】+【
14
】+【#】
Home auto
Home auto
<01>25002500
Home auto
<01>17302030
Mode
(hour: minutes)
Activation
Example:
17:30 = activation
25:00 = deactivation
Disactivation
Example:
20:30 = activation
25:00 = deactivation
Position
Activation
[1]
Monday ,1 activation
2 Monday,
2
activation
3 Monday,
3
activation
F
