Pag. 37
DUALCOM-8 INSTALLATION MANUAL
ENGLISH
10.02 How you must self learning the wireless sensors.
In the self learning menu for sensors, keychain Tx. and Electronic Keys,
Press the digits
【
02
】
+
【
#
】
or flow up and down in the menu with the keys:
【
】
or
【
】
The Display will show:
Note: The self learning wireless zones start with 25 and go up to 72.
To have the control panel self learn a wireless sensor
, press the digits:
【
(25 –72)
】
+
【
#
】
On the Display will show:
The keypad will emit 2 beeps. At this point you must have the sensor send an alarm trigger transmis-
sion. The keypad will emit a series of beeps to confirm that the transmission has been received and
the code has been learned. Soon after the Display will show:
To have other sensors learned you must proceed by pressing the digits
【
(26-72)
】
+
【
#
】
On the Display will show:
If a sensor has been already learned on the Display you will see:
Code learning
<02>
Code learning
<02>25
Code learning
<02>26
Code learning
<02>26
25-72
:
Position No. or (Zone)
Code learning
<02>2522AD3304
“Pegaso” code learned
(in this case 22AD3304)
Sensor Position or Zone
(in this case zone
25
)
