Toyota Corolla HV 2019 Owner'S Manual Download Page 62

Page: 62 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

3-1. Basic operation



The scale of the map screen can
also be changed the following
ways:

• Dragging the scale bar marking to the

desired point.

• Pinch outward on the screen to zoom

in and pinch inward to zoom out.



Each time

is selected, the

automatic map zoom is turned
on/off.
The default automatic zoom level
can be selected. (



P.93)

●

The scale range is from 10 m to 1000

km (10 yd. to 600 miles).

●

After the scale has been changed, the

new scale indicator will be displayed

for a while.

The map layout can be changed
between 3D heading-up, 2D head-
ing-up and 2D north-up by selecting
the map layout button.

Select the map layout button.

: 3D Heading-up symbol

The direction of vehicle travel is
always up.

: Heading-up symbol

The direction of vehicle travel is
always up.

: North-up symbol

Regardless of the direction of vehi-
cle travel, north is always up.



Each time map layout button is
selected, the map layout
changes as follows:

(3D heading-up)



(2D

heading-up)



(2D north-up)

Map layout

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands