Toyota Corolla HV 2019 Owner'S Manual Download Page 90

Page: 90 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

3-4. Favourite destinations

Select “Yes” if the confirmation
screen appears.

Select the desired method to
enter the location.

The POIs and routes that are regis-
tered on your Toyota portal site can
be transferred via a USB memory.
They will be stored in the favourites
list.

Connect a device.

Select “Yes” when the confirma-
tion screen appears.

Check that a progress bar is
being displayed while the data
loading is in progress.



To cancel this function, select
“Cancel”.



A confirmation screen is dis-
played when the operation is
complete.

Check that the entry is regis-
tered in the favourites list.

The POIs and routes that are regis-
tered on your Toyota portal site can
be downloaded via the internet.
They will be stored in the favourites
list.
For detailed information about
downloading POIs and routes:



P.194

Transferring POIs and
routes via a USB memory

Downloading POIs and
routes via the internet

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands