Toyota Corolla HV 2019 Owner'S Manual Download Page 39

Page: 39 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

2-2. Connectivity settings

Bas

func

tion

(



P.40)

Select the desired connection.

“Device info”: Select to confirm and
change the Bluetooth

device infor-

mation. (



P.41)



When another Bluetooth

device

is connected



To disconnect the Bluetooth

device, select “Yes”.

Check that a confirmation
screen is displayed when the
connection is complete.



If an error message is displayed,
follow the guidance on the
screen to try again.

●

It may take time if the device connec-
tion is carried out during Bluetooth

audio playback.

●

Depending on the type of Bluetooth

device being connected, it may be
necessary to perform additional steps

on the device.

●

When disconnecting a Bluetooth

device, it is recommended to discon-
nect using this system.



P.162



P.176



P.121

■

Auto connection mode

To turn auto connection mode on,
set “Bluetooth power” to on.
(



P.42) Leave the Bluetooth

device in a location where the con-
nection can be established.



When the engine switch <power
switch> is turned to ACC or ON,
the system searches for a
nearby registered device.



The system will connect with the
registered device that was last
connected, if it is nearby. When
automatic connection priority is
set to on and there is more than
one registered Bluetooth

phone

available, the system will auto-
matically connect to the
Bluetooth

phone with the high-

est priority. (



P.43)

Connecting a Bluetooth

device in a different way
(from phone top screen)

Connecting a Bluetooth

device in a different way
(from phone setup screen)

Connecting a Bluetooth

device in a different way
(from Bluetooth

audio

screen)

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands