Toyota Corolla HV 2019 Owner'S Manual Download Page 41

Page: 41 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

2-2. Connectivity settings

Bas

func

tion

●

When deleting a Bluetooth

phone,

the contact data will be deleted at the

same time.

The Bluetooth

device’s informa-

tion can be displayed on the
screen. The displayed information
can be edited.
This operation cannot be performed
while driving.

Display the Bluetooth

settings

screen. (



P.38)

Select “Registered device”.

Select the desired device to be
edited.

Select “Device info”.

Confirm and change the
Bluetooth

device information.

The name of the Bluetooth

device. Can be changed to a
desired name. (



P.42)

Select to set the Bluetooth

audio player connection
method. (



P.42)

Device address is unique to the
device and cannot be changed.

Phone number of the Bluetooth

phone.

Compatibility profile of the
Bluetooth

device.

Select to reset all setup items.

●

If 2 Bluetooth

devices have been

registered with the same device

name, the devices can be distin-

guished by referring to the device
addresses.

●

Depending on the type of phone,

Editing the Bluetooth

device information

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands