Toyota Corolla HV 2019 Owner'S Manual Download Page 165

Page: 165 / 222

165

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

7-1. Phone operation (Hands-free system for cellular phones)

Phone

Display the phone top screen.
(



P.160)

Select the desired method to
call from.

■

Calling methods from phone
screen



By call history (



P.165)



By favourites (



P.166)



By contacts (



P.166)



By keypad (



P.167)



By message (



P.175)

■

Also the following lists are
available from each function’s
screen



By POI call

(



P.66)



By speech command system
(



P.163)



SOS

(



P.167)



By home screen (



P.168)

: With navigation function

Up to 45 of the latest call history
items (missed, incoming and outgo-
ing) can be selected.

Display the phone top screen.
(



P.160)

Select “History” and select the
desired contact.



If the contact which is not regis-
tered on the contact list is
selected, the name is displayed
as “Unknown contact”. In this
case, select the number to make
a call properly.

Check that the dialing screen is
displayed.

●

The icons of call type are displayed.

: Missed call

: Incoming call

: Outgoing call

●

When making a call to the same num-

ber continuously, only the most recent
call is listed in call history.

●

When a phone number registered in
the contact list is received, the name

is displayed.

●

Number-withheld calls are also mem-

orized in the system.

●

International phone calls may not be
made depending on the type of
Bluetooth

phone you have.

●

The list should group together consec-
utive entries with the same phone

number and same call type. For

example, two calls from John’s mobile
would be displayed as follows: John

(2)

Placing a call using the

Bluetooth

hands-free

system

After a Bluetooth

phone has

been registered, a call can be
made using the hands-free
system. There are several
methods by which a call can be
made, as described below.

Calling methods on the
Bluetooth

phone

By call history

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands