Toyota Corolla HV 2019 Owner'S Manual Download Page 187

Page: 187 / 222

187

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

7-3. What to do if...

Phone

■

Message transfer is not ena-
bled on the cellular phone.

Enable message transfer on the
cellular phone (approve message
transfer on the phone).

■

Automatic transfer function on
this system is set to off.

Set automatic transfer function on
this system to on. (



P.178)

■

Notification of
SMS/MMS/E-mail reception on
this system is set to off.

Set notification of
SMS/MMS/E-mail reception on this
system to on. (



P.177)

■

Automatic message transfer
function is not enabled on the
cellular phone.

Enable automatic transfer function
on the cellular phone.

■

Connection confirmation dis-
play on this system is set to
on.

To turn off the display, set connec-
tion confirmation display on this
system to off. (



P.42)

: The engine switch <power switch> is

in ACC or ON.

■

The cellular phone is not close
enough to this system.

Bring the cellular phone closer to
this system.

■

Radio interference has
occurred.

Turn off Wi-Fi

devices or other

devices that may emit radio waves.

■

The cellular phone is the most
likely cause of the symptom.

Turn the cellular phone off, remove
and reinstall the battery pack, and
then restart the cellular phone.
Enable the cellular phone’s
Bluetooth

connection.

Disable the Wi-Fi

connection of

the cellular phone.

When using the Bluetooth

message function

Messages cannot be viewed.

New message notifications are not
displayed.

In other situations

The Bluetooth

connection status

is displayed at the top of the
screen each time the system is
activated.

Even though all conceivable
measures have been taken, the
symptom status does not change.

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands