Toyota Corolla HV 2019 Owner'S Manual Download Page 172

Page: 172 / 222

172

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

7-1. Phone operation (Hands-free system for cellular phones)

used on message function:

• Receiving a message (



P.172)

• Checking received messages

(



P.172)

• Checking sent messages (



P.173)

• Create new message (



P.173)

• Replying to a message (quick reply)

(



P.174)

• Calling the message sender

(



P.175)

• Message settings (



P.183)

When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is
ready to be operated on the screen.

Select to check the message.

Select to not open the message.

Select to call the message
sender.

●

Depending on the cellular phone used

for receiving messages, or its registra-
tion status with the system, some

information may not be displayed.

●

The pop-up screen is separately avail-

able for incoming e-mail and

SMS/MMS messages under the fol-
lowing conditions:

E-mail:
• “Incoming E-mail display” is set to

“Full screen”. (



P.177)

• “E-mail notification pop-up” is set to

on. (



P.177)

SMS/MMS:
• “Incoming SMS/MMS display” is set to

“Full screen”. (



P.177)

• “SMS/MMS notification pop-up” is set

to on. (



P.177)

Display the message screen.
(



P.171)

Select a desired account name.

Select the desired message
from the list.

Check that the message is dis-
played.

Select to call the message
sender.

Select to have messages read
out.
To cancel this function, select
“Stop”.
When “Automatic message
readout” is set to on, messages
will be automatically read out.
(



P.183)

Select to display the previous or
next message.

Receiving a message

A
B
C

Checking received mes-
sages

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands