Toyota Corolla HV 2019 Owner'S Manual Download Page 166

Page: 166 / 222

166

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

7-1. Phone operation (Hands-free system for cellular phones)

Calls can be made using registered
contacts which can be selected
from a contact list. (



P.182)

Display the phone top screen.
(



P.160)

Select “Favourites” and select
the desired contact.

Select the desired number.

Check that the dialing screen is
displayed.

Calls can be made by using contact
data which is transferred from a
registered cellular phone. (



P.178)

Up to 5000 contacts (maximum of 4
phone numbers and e-mail
addresses per contact) can be reg-
istered in the contact list.

Display the phone top screen.
(



P.160)

Select “Contacts” and select the
desired contact.

Select the desired number.

“Add favourite”/“Remove favourite”:
Select to register/remove the contact in
the favourites list. (



P.182, 183)

“E-mail addresses”: Select to display all
registered e-mail addresses for the
contact.

Check that the dialing screen is
displayed.

■

For PBAP compatible
Bluetooth

phones when

“Automatic transfer” is set to
on (



P.179)



Contacts are transferred auto-
matically.

■

For PBAP compatible
Bluetooth

phones when

“Automatic transfer” is set to
off (



P.179)

Select the desired item.

Select to always transfer all the
contacts from a connected cellu-
lar phone automatically.

Select to transfer all the con-
tacts from a connected cellular
phone only once.

Select to cancel transferring.

By favourites list

By contacts list

When the contact list is
empty

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands