Toyota Corolla HV 2019 Owner'S Manual Download Page 124

Page: 124 / 222

124

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

4-3. Media operation

(



P.45)



MirrorLink™ connection mode is
set to “USB & Wi-Fi

”. (



P.125)

Turn the MirrorLink™ (Wi-Fi

)

function of your smartphone on.

Display the application list
screen. (



P.122)

Select “MirrorLink™ (Wi-Fi

)”.



The system will automatically
start searching for a MirrorLink™
compatible device.

Select “Connect” or select the
system name on the
smartphone.



If the device has been connected
to the system before, the
MirrorLink™ connection may
start immediately.

Select “Yes”.

Check that MirrorLink™ opera-
tion screen is displayed and
then select “I agree”.



Depending on the device con-
nected, it may take approxi-
mately 5 to 15 seconds before
the this screen is displayed.

: Wi-Fi

is a registered trademark of

Wi-Fi Alliance

●

The signal strength/status of the
Wi-Fi

connection (P2P mode) is dis-

played on the upper right side of the

screen. (



P.15)

●

To check the MirrorLink™ setting on
the Wi-Fi

setting screen:



P.45

●

Miracast™ and MirrorLink™ will not
be available at the same time using
Wi-Fi

connection (P2P mode).

Display the MirrorLink™ control
screen. (



P.122)

Select “Reorder”.

Select the desired application

then

to reorder.

Reordering the application

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands