Toyota Corolla HV 2019 Owner'S Manual Download Page 99

Page: 99 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

3-5. Setup

Nav

igatio

n s
ys

tem

tion. (



P.79)

Select to set the default avoid-
ance criteria for the route calcu-
lation. (



P.99)

Display the navigation settings
screen. (



P.98)

Select “Avoidance criteria”.

Select the desired items to
avoid.

Press the “SETUP” button.

Select “Navigation”.

Select “Manage stored destina-
tions”.

Select the desired item.

Select to delete all favourites.

Select to delete all recent desti-
nations.

The backup of the favourites on
the USB device will be loaded
into the list of favourites on the
navigation system.

The navigation favourites will be
sent to the connected USB
device.

Setting the avoidance criteria
for the route calculation

Displaying Manage stored
destinations screen

A
B

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands