Toyota Corolla HV 2019 Owner'S Manual Download Page 73

Page: 73 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

3-2. Destination search

Nav

igatio

n s
ys

tem



Registered multiple day/time slot

Select desired destination to
start route guidance.



is selected, last active

screen will display.



Registered a day/time slot

Select “Auto-navigation” to start
route guidance.



If “Continue” is selected, active
route guidance will continue.



Registered multiple day/time slot

Select “Auto-navigation” to start
route guidance.



If “Continue” is selected, active
route guidance will continue.

Select desired destination to
start route guidance.



is selected, last active

screen will display.



A pop-up message is displayed
when you start the vehicle in reg-
istered day/time slot.



Automatic navigation is availa-
ble to the 4 favourite destinations
(home, work, and 2 other favour-
ites) only.



To use this feature, it is neces-
sary to register day/time slots for
the destinations.

To use automatic navigation, it is
necessary to register day/time slots
for the destinations.

Select

of the desired desti-

nation.

Enter the desired day and time
information for the commutes.



Select “Auto-navigation” to set

When the destination is set

Registering day/time slots

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands