Toyota Corolla HV 2019 Owner'S Manual Download Page 152

Page: 152 / 222

152

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

6-1. Rear view monitor system

The rear view monitor system dis-
plays an image of the view from the
bumper of the rear area of the vehi-
cle.

Corners of bumper



The area around both corners of
the bumper will not be displayed.

●

The image adjustment procedure for
the rear view monitor system screen

is the same as the procedure for

adjusting the screen. (



P.31)

●

The area displayed on the screen may

vary according to vehicle orientation
conditions.

●

Objects which are close to either cor-
ner of the bumper or under the

bumper cannot be displayed.

●

The camera uses a special lens. The

distance of the image that appears on
the screen differs from the actual dis-

tance.

●

Items which are located higher than

the camera may not be displayed on

the monitor.

The camera for the rear view moni-
tor system is located as shown in
the illustration.



Hatchback



Wagon

■

Using the camera

If dirt or foreign matter (such as
water droplets, snow, mud, etc.) is
adhering to the camera, it cannot
transmit a clear image. In this case,
flush it with a large quantity of water
and wipe the camera lens clean
with a soft and wet cloth.

Rear view monitor sys-

tem precautions

Area displayed on screen

The camera

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands