Toyota Corolla HV 2019 Owner'S Manual Download Page 102

Page: 102 / 222

102

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

3-6. Tips for operating the navigation system

Plug in the USB device contain-
ing the new navigation database
files.

Select “Yes” to update.

Enter activation code if required.



If the activation code is invalid,
the navigation database will not
be updated.

Make sure the engine is running
<the hybrid system operating>
and select “Confirm” to continue
with the update.



You will see an update progress
screen followed by a confirma-
tion that the database has
updated successfully.

Remove the USB device when
prompted. This restarts the navi-
gation system and completes
the update process.

●

Updating may not complete correctly

in the following cases:

• If the navigation system is turned off

before updating is complete

• If the USB device is removed before

updating is complete

●

The amount of time required to com-

plete the update process depends on
the size of the data.

Navigation database

updates

Navigation database which
contains system software, map
data, Gracenote database, etc.,
can be updated using a USB
memory.

For details, contact Toyota
dealer or refer to Toyota portal
site (www.my.toyota.eu).

Updating navigation data-
base

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands