Toyota Corolla HV 2019 Owner'S Manual Download Page 44

Page: 44 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

2-2. Connectivity settings

Select the desired item to be
set.

Displays system name. Can be
changed to a desired name.
(



P.44)

PIN code used when the
Bluetooth

device was regis-

tered. Can be changed to a
desired code. (



P.44)

Device address is unique to the
device and cannot be changed.

Select to set the connection sta-
tus display of the phone on/off.

Select to set the connection sta-
tus display of the audio player
on/off.

Compatibility profile of the sys-
tem

Select to reset all setup items.

■

Editing the system name

Select “System name”.

Enter a name and select “OK”.

■

Editing the PIN code

Select “System PIN code”.

Enter a PIN code and select
“OK”.

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands