Toyota Corolla HV 2019 Owner'S Manual Download Page 63

Page: 63 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

3-1. Basic operation

Nav

igatio

n s
ys

tem

Various information can be dis-
played on the map.

: If RSA is not equipped.

The speed limit of the road cur-
rently being traveled on can be dis-
played.

Displays information about the
speed limits icon and limited
speed on the current road.

Buildings can be displayed in 3D on
the map.



This feature is displayed on the

map in zoom scales up to 50m
(50yd.).

Landmarks can be displayed in 3D
on the map.



This feature is displayed on the
map in zoom scales up to 50m
(50yd.).

Safety cameras can be displayed
as icons on the map.

Safety camera location on the
map.

Displays information about the
safety camera icon and distance
to safety camera.

●

The above items will be displayed
depending on the map scale.

●

The above items will be displayed

Map screen information

Displaying various informa-
tion on the map

Speed limits

3D buildings

3D landmarks

Safety cameras

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands