Toyota Corolla HV 2019 Owner'S Manual Download Page 45

Page: 45 / 222

COROLLA_COROLLA

HV(TMUK)_Navi_(EE)

2-2. Connectivity settings

Bas

func

tion

Press the “SETUP” button.

Select “Wi-Fi

”.

Select the items to be set.

: Wi-Fi

is a registered trademark of

Wi-Fi Alliance

Select to turn the Wi-Fi

func-

tion on/off. (



P.46)

Select to access to network
on/off.

Displays connected network
name

Select to search for available
networks that can be con-
nected.

(



P.46)

Select to connect quickly to a
WPS compatible Wi-Fi

device.

(



P.46)

Select to set the detailed Wi-Fi

settings.

(



P.47)

Displays status of the
Miracast™ connection.

“On”: Connecting
“Off”: Not connecting

Displays status of the
MirrorLink™ connection.

“On”: Connecting
“Off”: Not connecting

: With navigation function

: Miracast™ status should be dis-

played only for Miracast™ supported
models.

: MirrorLink™ status should be dis-

Connecting to

internet/Miracast™/

MirrorLink™ via Wi-Fi

MirrorLink™, Miracast™ and
the connected service, etc. can
be used using the Wi-Fi

func-

tion of the system.

Displaying the Wi-Fi

set-

tings screen

Wi-Fi

settings screen

Summary of Contents for Corolla HV 2019































































































































































































































Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands

Toyota Corolla HV 2019, Owner'S Manual

Search results

Summary of Contents for Corolla HV 2019

Reviews:

Related manuals for Corolla HV 2019

Brands by name

Popular brands