TOWA LCM1010, Operation Manual, Page: 483 / 552

LCM1010 Instruction Manual 4 INSTALLATION
4.8.3 Exhaust Duct
Connect the exhaust ducts from the factory facility to the top ducts o f each Press
module and Resin Module.
A
CAUTION
When connecting the exhaust ducts, be sure to use hose bands and
make sure that the connection is stable.
When the caliber of the exhaust ducts from the factory facility is
incompatible with the machine, adjust with a reducer, etc., and
carry out connection so that exhajust gas does not leak from the
connection point.
A
CAUTION
The exhaust ducts connected to the Resin Module from the factory
facility, and set up the airf ow sensor.
T£W A
4-55