TOWA LCM1010, Operation Manual, Page: 264 / 552

8 INTELLIGENT SYSTEM
LCM 1010 Instruction Manual
Machine Monitor
The Machine M onitor will display the status o f components and materials such as
frames, resin and film.
The Machine M onitor also controls the work mode o f the Hold Frame.
(1)
Door lock status
Blinking in yellow : Unlocked
B lack: Locked
(2)
Module status
— : Not on staiS&.y
S tandby: Standby status
Auto (Light b lu e ): A utoiratic operation
(3)
Film winding status
B lack: Normal ^ ;;|
Blinking in b la c k : Aiarm status_.,lTilm is'full.)
(4)
Workpiece status
Green : Pre-molding frame is present.
Blinking in green : Post-molding frame is present.
Light blue frame : Film feed is completed.
Resin indication : Dispensing is completed,
(Resin is present.)
(5).
Film feed status
Light blue : Film is present.
Blinking in yellow : Alarm status (Film em pty notice.)
B lack: No film
(6)
Film lock status
G ray: Locked
Blinking in yellow : Unlocked
(7)
Resin status
White frame : Cartridge is present.
White : Resin is present. (After correction)
Blinking in gray : Resin is present. (Before correction)
R em ain in g v o lu m e o f r e s in (allo w ab le n u m b e r o f sh o ts) is
displayed.
8-6
TSWA