TOWA LCM1010, Operation Manual, Page: 13 / 552

1 GENERAL INFORMATION LCM 1010 Instruction Manual
TOWA Corporation offers the same service for parts or products attached to or mounted in the
machine, which are not manufactured by TOWA Corporation; however,’ this service is limited
to the specific warranty period o f each part or product.
The warranty period o f the dry-pump is 1 year or 3000 hours o f operation time whichever is
earlier. л
The following cases will not be covered under the warranty so the customer will be charged
for service and/or parts, even during the period o f warranty:
6 ' *
(1) Parts designated by TOWA Corporation as consumption articles (parts that are subject
to normal wear and tear).
(2) Damage or malfunction due to misuse, improper repair or modification by the customer.
(3) Damage or malfunction caused by the customer’s failure to perform maintenance,
inspection and lubrication as specified in the instruction manuals.
(4) Damage due to falling or dropping during transport by the customer.
(5) Damage caused by fire, earthquake, flood, lightning, or other natural disasters.
( 6 ) Damage caused, under abnormal circumstances, by the use o f substances such as
organic solvents or corrosive gases, etc., or by the use o f strong magnetic fields, etc.
(7) Damage caused by abnormalities o f voltage, hydraulic pressure, water pressure, and/or
pneumatic pressure.
( 8 ) Other damage or malfunction deemed to be the responsibility o f the customer.
(9) Damage or malfunction o f the parts due to the constituents which come from the
molding materials (resins, substrate, etc), releasing film, and pre-tape.
(10) Damage or malfunction when works (substrate, resin, magazine, etc) not within the
tolerance specified in the customer specification are used.
(11) Damage or malfunction due to additions or/and modifications o f the software or/and
hardware without prior approval o f TOWA Corporation. ' * '
Make sure to have made back-ups o f data and taken any other related.measures in advance, as
there exists the possibility o f losing previously stored data lu rin g repair work or replacement
o f parts. . ’
1-4
T£W A