TOWA LCM1010, Operation Manual, Page: 133 / 552

LCM 1010 Instruction Manual 1 GENERAL INFORMATION
1 GENERAL INFORMATION
This section contains the general machine outline, customer service information, and the limited
warranty.
ж-
1.1 General Information
- The customer must know that this machine involves potential hazards. Never
attempt to operate this machinery until the instructions written in this manual have
been read and fully understood.
Always follow the instructions irrthis manual whernparrying out a job.
- TOWA Corporation is not fiable for any damage or injury arising from an
individual's failure to follow the instructions contained in this manual, failure to
exercise due care and caution, or misuse or modification of the machine without
prior written consent from TOWA Corporation.
- In today's rapidly changing manufacturing industry, with new materials, processes and
higher speed equipment, the potential for exposure to accidents is increasing.
TOWA Corporation cannot anticipate every possible circumstance that could involve
potential hazards.
The warnings in this manual are, therefore, not all-inclusive.
Actions that cannot or must not be conducted are too innumerable to detail in this manual.
Please regard any activity not explicitly allowed or explained in this manual as prohibited.
Regard as “ Cannot” unless “Can” is clearly indicated in this manual.
W hen operating the machine, pay sufficient attention to ;ggneral safety m easures, not only
to the safety precautions explained in this manual and thepwaming stickers affixed to the
machine itself. ' '
- Copyright® 2010 TOWA CORPORATION . J -
This manual is copyrighted and all rights are reserved.
This manual may not, in whole or part, be copied, photocopied or reproduced in any way,
without prior written consent from TOWA Corporation.
- The contents o f this manual are based on the information and machine specifications
available at the time of shipment o f the machine. The contents o f this manual may be
altered due to the modification o f the machine or for the improvement o f the manual.
TSWA
1-1