TOWA LCM1010, Operation Manual, Page: 451 / 552

LCM 1010 Instruction Manual 4 INSTALLATION
4.5.4 Confirmation of Rails for Resin Handler Unit
(1) Open the rear safety covers o f each o f the Press m odules and the Resin
M odule.
(2) Put the bloc,к cages, etc. onto the rails from the first press m odule and m ake
sure there is no difference in level w ith the other m odule rails.
(3) Confirm that the gap betw een the linear rails is 0.5 -1 .0 mm.
(4) C an y out the same procedures to align the rails o f all the modules.
6 (5) Then, confirm that the Resin H andler U nit can be m oved sm oothly from the
Resin M odule to the first press module.
T2WA
4-23